Since its foundation in 2012, EVE Audio has made a strong impression on the pro audio scene by manufacturing high-quality active studio monitor loudspeakers brimming with innovations that provide flatter, clearer monitoring to engineers, producers and project studios around the world. Rave reviews and a steadily growing community of BeliEVErs has seen EVE Audio grow from a hidden secret to a force to be reckoned with on the global studio monitor market.
SC205
With an extended bass frequency response and an astounding output level, the SC205 will easily fill your room with exceptional sound. The SC205 comes with the convenience of threaded screw inserts on the bottom and the back so you can mount your SC205 on a regular microphone or speaker stand, or use the back plate for different wall mounting options.
The SC205 uses a 5" SilverCone woofer for an extended bass response. This very stiff diaphragm is honeycomb structured and glass fibre coated. The SC205 is driven by a sophisticated low distortion copper cap magnet system that uses a 1" voice coil responsible for delivering a greater linear excursion. All in all, this produces a higher dynamic range than one might naturally assume from a speaker of these proportions.
The AMT (Air Motion Transformer) tweeter is EVE Audio's own proprietary technology that follows the rule of not using "off-the-shelf" components when looking for the best possible results. The preciseness and detail in the high frequency, along with the general tightness of the bass and mid-range frequencies, will make the SC205 equally adequate for use on the road or in the studio.
With every EVE Audio speaker, you also get high resolution DSP electronics. One push knob operation and you will have access to accurate volume control and several different filter settings that will help you tailor your monitors to the way you work. And if you tend to avoid digital processing, we've got you covered. The DSP engine is supported by a high quality Burr-Brown A/D converter (24bit/192kHz), which delivers a pristine signal to the DSP section. And since the PWM amplifiers are directly connected to the DSP, no additional conversion is necessary. That's right, the ART Tweeter and the 5” cone feed off of a digital signal!
One of the downside effects of port compression is bass distortion. As you turn up the volume, the efficiency of the port reduces and distortion will increase. A large rear rectangular port with no hard edges is used for the bass port design. That's one of the reasons EVE monitors have a high efficiency on the lower frequencies. The results? High sound pressures with tight and punchy bass frequencies that won't cause port distortion. Crank up the volume, and your EVE monitor will deliver well-rounded bass. With no ugly front holes staring back at you.
SC407
The SC407 features a very powerful amplifier array, with one amplifier per driver. The larger woofers duplicate all frequencies up to a certain crossover frequency. The mid-range woofer picks up from there. This also means tha all EVE Audio four-way speakers are symmetrical, as the woofers do not serve different frequency bands, but essentially duplicate the bass frequencies with utmost precision. The result? Incredible and very tight bass reproduction, extremely linear response, and plenty of power to shake up your main studio control room.
The stylish grey plate in the middle of the speaker not only houses the midrange woofer and AMT tweeter, but it can also be rotated so that you can place your speaker vertically or horizontally. Two 6.5" SilverCone woofers with a specially made 1.5" voice coil extend the bass frequency response down to 35Hz and work in tandem up to 280Hz. A specifically developed 4" SilverCone midrange unit joins these high quality bass drivers that endows these speakers with a greater linear excursion and a clear and accurate midrange. The bass and mid woofers feature EVE Audio's very low distortion copper cap magnet system. They combine the unique glass fibre coated diaphragms with a stable honeycomb structure to deliver spectacularly detailed and clear sound.
The proprietary AMT RS3 (Ribbon System 3) tweeter houses a bigger magnet system to deliver a higher output level with virtually no distortion, even at high output levels. Each driver is provided with its own PWM amplifier for a total short-term output power of 600 W. With a maximum output level of 116dB (SPL @ 1 m) you'll definitely be able to judge your mixes precisely, whatever their intended output level is.
With every EVE Audio speaker, you also get high resolution DSP electronics. One push knob operation and you will have access to accurate volume control and several different filter settings that will help you tailor your monitors to the way you work. And if you tend to avoid digital processing, we've got you covered. The DSP engine is supported by a high quality Burr-Brown A/D converter (24bit/192kHz), which delivers a pristine signal to the DSP section. And since the PWM amplifiers are directly connected to the DSP, no additional conversion is necessary. That's right, the ART Tweeter and the cones feed off of a digital signal!
One of the downside effects of port compression is bass distortion. As you turn up the volume, the efficiency of the port reduces and distortion will increase. A large rear rectangular port with no hard edges is used for the bass port design. That's one of the reasons EVE monitors have a high efficiency on the lower frequencies. The results? High sound pressures with tight and punchy bass frequencies that won't cause port distortion. Crank up the volume, and your EVE monitor will deliver well-rounded bass. With no ugly front holes staring back at you.
As with every other EVE Audio speaker, you get both balanced XLR inputs and unbalanced RCA inputs for greater convenience.